GLK2-D Straightener Feeder with Double Decoiler (0.2-3.2mm)

Group GLK-D Straightener-Feeder with Double Decoiler
Min. Order 1 piece
Terms of Payment all
Update Time 2018-07-20
Item specifics
Applicable materialSPHC.SPHD,SPCC,SPCD,SPCE,Galvanized coil
Coil carSafe and convenient coil loading operation with the assist
Uncoiler shaft synchronizes with feeder machineAdopting frequency control and gear motor.
Power driven pressing armprevents the material from being scattered and to assist the uncoiling
Uncoilling directionFrom bottom to up input coil
Straightener rollerΦ48mm x 11 pieces ,top 6/ bottom5,
Straightener number adjustment wayWorm adjusting by Manual
Straightener roller drive waySide gear drive
Straightening precision≤1.5mm/㎡
Feeding line height adjust wayMotor-driven , Feeding line height ±100mm
Product Description

For GLK2-D series of coil feeding line, a simple panel operation can make coil material loading and strip loop formation automatically. 

This is a decoiler straightener feeder with high automation that improves work efficiency.

The double decoiler part can help change the coil convenient and swift.

A wide range of coil specifications can be handled by this coil feeding line, including strip width of 50mm to 1000mm and sheet thickness of 0.3mm to 3.2mm.

This model is designed for coil width an outside diameter up to 1200mm.

The double decoiler design can help change the coil convenient and swift with simple operations. 

The strip is drawn off the coil from the bottom.

The coil can be well-knit thanks to a rubber wheel pressing arm, to avoid strip disperse.

4 pcs of "A type frames" can locate the strip, avoid coil shuffling

Hydraulic coil loading car is optional for each customer's specific request.

Strips mounted on the decoiler will be threaded up to the straightener inlet until a loop shape is formed, and this achieves a shorter setup time. 

All the straightening rolls HongEr use is GCr15, hardness reaches HRC 58-62, through 100% quality inspection.

Air pressure helps the straightening-feeder improving ease-of-maintenance and performance.

The straightener feeder has a Mitsubishi PLC (programmable logic controller) that provides versatility and meet the requirements from different production.

And there is also the hydraulic shearing unit, the automatic lubricating machine for optional.
Hot Rolled Steel, Cold Rolled Steel, Galvanized Steel, Painted Steel, Stainless Steel, Copper, Aluminum etc.
Coil Width
50-400 mm 
50-500 mm
50-600 mm
50-800 mm
50-1000 mm
Strip Thickness
0.3-3.2 mm
Feeding Length
Max. 9999.99 mm
Coil I.D.
Coil O.D.
Loading Capacity
3000 kgs per side
3000 kgs per side
5000 kgs per side
5000 kgs per side
7000 kgs per side
Feeding Precision
Straightener Rolls
Φ48mm * 11pcs
Φ68mm * 7pcs
Pinch Rolls
Φ68mm * 2pcs
Φ88mm * 2pcs
Pressing Arm
Pneumatic Type
Hydraulic Expansion
* Machine Spec can be customized according to your specific demands. 
* Coil Feeding line for high strength material, please check our GLK-H series
Straightener-Feeder with Double Decoiler in our customer's workshop: